I need help.....can someone please give me any suggestions on what kind of cam they have put in their truck, where they got it, and how much it cost....I wanted to run one with a longer duration without having to flycut the pistons at this time....I have the 60# exhaust springs. Any help would be greatly appreciated!!!

 

hamiltoncams.com makes a good cam.
Be careful of the head gasket though, they usually pop soon after because of the increase in cyl pressure

 

I have an Enterprise Engine street cam. It works great even with the stock turbo. It came with new tappets, also. Mine came from Keating Machine.

 

anyone got a price on either of those 2 cams.....I checked their sites and one is under construction and one keeps coming up with a 404 http error...And thanks for the start guy's.....it is greatly appriciated!!!

 

I believe it was around $550 with tappets.

 

PDR, Piers Diesel Research http://piersdiesel.com/

 

i got a helix 2 , it was 488.00 I think just the cam.

 

If youre going to go through the hassle of installing the cam Id do the pushrods, lifters, valve springs, etc all in one go.
Hamilton requires those things for the warranty I think.
Id also get the cam that bolts to the gear versus a press-fit.