Hi All,

I would like to put a torque convertor lock up switch(mystery switch) with a indicator light, and a torque convertor lock disable switch for city driving. There is lots of good info on the net on the TC lock up switch, but none show the big picture of what you are doing in a schematic.

Specifically I amlooking at the Trans Relay and its function. My Haynes manual shows some info on PCM wiring, but it does not show the trans relay at all?

Any help is always appreciated.

Cheers

 

You have to add the relay



Much more here-
http://www.tstproducts.com/tranny_install.html

 

Thanks Infidel, That will do the trick