hydraulic pump just went out, 97 12v, any installation tips?
purchased a seal kit pitman arm from dealer today. but they didn't have other seal.
got Orielly to order a seal kit with both seals and gaskets. next up is resealing steering box.
reman steering box is $171 worst case. I may put transmission dye in first.
a dodge tech stated ATF-4 was ok to use in my power steering. much rather be using synthetic. sooo is ATF-4 ok to use in my 97 CTD?
got Orielly to order a seal kit with both seals and gaskets. next up is resealing steering box.
reman steering box is $171 worst case. I may put transmission dye in first.
a dodge tech stated ATF-4 was ok to use in my power steering. much rather be using synthetic. sooo is ATF-4 ok to use in my 97 CTD?
ATF +4 is synthetic. Or a blend at least. You can also buy Valvoline synthetic at most parts stores that is ATF+4 compatible. Why take the whole gearbox apart? You can replace the pitman shaft seal pretty easy, without taking it off the truck!
If you end up replacing the steering gear why not ugrade to a PSC 3 turn steering gear. I can steer with one finger.
http://www.pscmotorsports.com/produc...products_id=91
http://www.pscmotorsports.com/produc...products_id=91
thanks... that's what I'm planning on doing first. which is replacing pitman arm seal without dropping gearbox.
Thread
Thread Starter
Forum
Replies
Last Post
VikingDiesel
3rd Gen Engine and Drivetrain -> 2003-2007
4
Aug 12, 2007 10:10 PM
4x4dually
Performance and Accessories 2nd gen only
16
Sep 13, 2006 05:05 PM
drew03
Fuels / BioDiesel / Diesel Prices
76
Feb 6, 2006 07:57 AM
pwrtripls1
1st Gen. Ram - All Topics
12
Dec 17, 2005 05:38 AM



