12 Valve Engine and Drivetrain Talk about the 12V engine and drivetrain here. This is for 1994-1998.5 engine and drivetrain discussion only.

98 2500 2wd 12 valve front coil springs

Old Jan 12, 2009 | 06:28 PM
  #1  
vtailflyer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2003
Posts: 97
Likes: 0
From: Calgary, Alberta
98 2500 2wd 12 valve front coil springs

Hi All,

My passenger side coil spring broke this weekend... I've phoned around looking for one (or two, Ive heard you should replace in pairs, is this true?) however it seems it is a dealer part only,,, 425 each...ouchhh

Is there any aftermarket coils for the 2wd with stock ride height?

I also spoke to a diesel shop in town that do lift kits and they said they have lots of stock springs,,, but there not sure what year there from and there mostly from 4wd. Are the 2wd and 4wd springs the same?

Thanks in Advance...

Cheers
Reply
Old Jan 12, 2009 | 08:18 PM
  #2  
dozer12216's Avatar
Registered User
 
Joined: Dec 2007
Posts: 2,738
Likes: 0
From: North Carolina or Kentucky. Take your pick
You can check part #'s if still on springs. Generally there is one parts # apart on right and left springs for same application. I would think a truck shop would have access to new MOOG springs. You can also check diameter and # of coils for pairs. Maybe a frame and alignment shop or a 4WD shop.
Reply
Old Jan 15, 2009 | 01:09 PM
  #3  
vtailflyer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2003
Posts: 97
Likes: 0
From: Calgary, Alberta
As a follow-up,

I ended up purchasing a set of Moog listed for the 94-96 dodge. The spring specs were correct, and upon arrival inspection to the old springs, they appered of better quality, specifically on the top side of the spring. After installation ride height was up about 1/4-3/8", however the old springs had 11 years and 190K on them. I was told by everyone I phoned that this was a dealer part only, the dealer wanted 450 ish a side (900 for both sides)... I paid 165 for both sides.
Just FYI for others.

Cheers
Reply
Old Jan 15, 2009 | 05:15 PM
  #4  
GAmes's Avatar
Registered User
 
Joined: Mar 2006
Posts: 1,269
Likes: 0
From: Killeen, Tx
Out of curiosity, how did you break a spring?
Reply
Old Jan 15, 2009 | 06:48 PM
  #5  
vtailflyer's Avatar
Thread Starter
Registered User
 
Joined: Nov 2003
Posts: 97
Likes: 0
From: Calgary, Alberta
I don't know.... The spring just broke one day on te way out of the garage... I certainly don't drive it hard,,, I inspected for oclusions or defects in the old ont but it looked like fatigue?
Reply
Old Jan 15, 2009 | 07:32 PM
  #6  
GAmes's Avatar
Registered User
 
Joined: Mar 2006
Posts: 1,269
Likes: 0
From: Killeen, Tx
Great, something else to look forward to.
Reply
Old Oct 11, 2011 | 10:58 PM
  #7  
blackdodge98's Avatar
Registered User
 
Joined: Oct 2011
Posts: 1
Likes: 0
what moog coil sping you got? i have 98 2500 12v 6cyl. and i am planning to change mine since passenger side sits lower than the driver side. thanks
Reply
Old Nov 26, 2011 | 09:24 PM
  #8  
whiskers's Avatar
Registered User
 
Joined: Jun 2007
Posts: 609
Likes: 0
From: Malakoff, TX
Where did you get the Moogs? Mine are weak also.
Reply
Old Nov 30, 2011 | 09:41 AM
  #9  
whiskers's Avatar
Registered User
 
Joined: Jun 2007
Posts: 609
Likes: 0
From: Malakoff, TX
Ordered some from JC Whitney.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
signature600
Performance and Accessories 2nd gen only
8
Mar 29, 2009 12:57 PM
Blessed
3rd Generation Ram - Non Drivetrain - All Years
1
Feb 14, 2007 10:31 PM
pecandude1
3rd Generation Ram - Non Drivetrain - All Years
16
Oct 11, 2005 08:35 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:12 PM.