6bt 12v with Allison 2000?
6bt 12v with Allison 2000?
Long story short, 2000 GM TopKick 6500.....retrofitted a 5.9/AT545 out of a 95 F700 ford truck.
I had an MT643 behind it for a while, it's much better (lockup) than the 545 (non lockup) but no emergency brake so I swapped it for the 545. This is a work truck, needs an emergency brake.
Anyhow i would like to swap for the Allison 2000 for a few reasons....overdrive, lockup and emergency brake drum.
Can anyone give me FACTS on what I will need electronics-wise? I'd like to plan it and have everything ready. Again truck is for work, hauls aggregate and does snow in the winter. Don't need any fancy stuff, just whatever I need to have it work well.
Thanks in advance
I had an MT643 behind it for a while, it's much better (lockup) than the 545 (non lockup) but no emergency brake so I swapped it for the 545. This is a work truck, needs an emergency brake.
Anyhow i would like to swap for the Allison 2000 for a few reasons....overdrive, lockup and emergency brake drum.
Can anyone give me FACTS on what I will need electronics-wise? I'd like to plan it and have everything ready. Again truck is for work, hauls aggregate and does snow in the winter. Don't need any fancy stuff, just whatever I need to have it work well.
Thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
65fury
Performance and Accessories 2nd gen only
2
Jun 26, 2013 10:11 AM
Resbum
1st Gen. Ram - All Topics
16
Feb 25, 2012 05:54 PM
Journier
12 Valve Engine and Drivetrain
6
Aug 13, 2005 04:04 PM
southernsmoker
Performance and Accessories 2nd gen only
4
Apr 20, 2004 10:20 AM



