well I have the 3k gov kit + 1k. and A set of 300inj under the hood with a 16cm housing. with a modified #10 plate.<br>On a dyno I pulled 390hp with the plate out I believe and like 370 or so with the plate full forward. This was also before the 16 housing was installed.<br>DM01<br>

 

kingofdodge7131:<br><br>You can look at my signature for my 96' 12 valve.<br>I am over 400 H.P. and Scheid Diesel did all the<br>work to my P7100 fuel pump. Dan Scheid and his<br>entire staff are great people and all three of his<br>shops (Terre Haute, Ind., Lafayette, Ind., Effingham,<br>Illinois) are Cummins/Bosch Certified. If you are <br>interested here is the toll free number to their<br>Terre Haute shop: 1-800-669-1593. Their<br>website is: www.scheiddiesel.com.<br><br>Good luck!<br><br>-------<br>John_P

 

Ditto what gitchesum, and Rammin on said, but don't forget the tranny mods, and for a little bit more add some delivery valves ;D ;D ;D<br><br>BBD