MrNaypp

While wiring up a new switch for my tc lockup, I wired the accessory wire to the swith and sent 12v directly into one of the wires on the lockup switch. Now my Oil pressure, temp, rpm and tranny temp on my pod gauge quit working and my ABS and brake light on on my dash quit working. I think it is either the PCM or the ECM but i'm not sure which one. Any help on this would be greatly appreciated!!

Tallguy67

Have you checked all the fuses in both panels (left side of dash by parking brake and under hood near driver's side battery)?

MrNaypp

Yes, I went through all of them and checked them with a meter. The number 2 fuse in the PD panel under the hood was blown causing my windows, blower motor and a few other things to not work, but I replaced it and those things started working again.

rightwinger

what guages do you have? I have had glowshift for 2 years and have had to have them send me 6 different fuel guages along with numerous parts/wiring for the fuel guage.....great customer service, horrible guages....