BigDiesel396

Tell me what model this t-case is and I'll buy you a beer at a Diesel event sometime in the future when my truck is finally done...

BigDiesel396

BTW the ID tag is long gone off this sucker so dont just tell me to look at it also it is supposed to be off of a '71 Ford 3/4 ton and it has a manufacture date on it in maybe march? of '71 ( i dont remember the exact numbers but it was sometime in '71)

LFD2037

NP 203? 205?


messagetooshort

BigDiesel396

its not a 203 and I dont think its a 205 because the drain and fill plugs are on the side, not on the back, it also does not have the 3 bolt cover on the back as does the 205 pictured on many sites...its also not a Dana300 or dana 20...

patdaly

Divorced NP 205, Ford up to 1976............

JPR Ram

Yeah, a divorced NP205???

stuckey200224

it a dana 300

04DEEZELRAM

its definately not a dana 300, because you would see the dana symbol made into the case, it looks like a divorced NP205 because it has three pinions on the t-case.

BigDiesel396

I have recently been told it could be a Dana 24, used in Ford 1/2 and 3/4 tons up to '72..... Anyone know anything about these???

04DEEZELRAM

Im pretty sure its not a Dana, because i didnt see "DANA" made into the case

Fronty Owner

NP205 divorsed.

I haven't found any images of the dana 24.

your tcase does look real close to a divorsed NP


ETA: http://www.fordification.com/transfercase.htm

at the bottom, the Dana 24 Ford used was married to the transmission.

rip 112

I agree, it looks like a np205.

04DEEZELRAM

Well i think im wrong it does look like a dana 24, look where the tag is and the fill ports are in the picture.

http://images.google.com/imgres?imgu...006-13,DGUS:en

BigHornCTD

Should be a divorced Dana 24, although I have not seen one in person. The divorced 205 didn't come into play with the Highboy Fords until '73 or '74.

Fronty Owner

that ford site does say the dana and the np look REALLY close externally.