water pump
#2
Registered User
Join Date: Oct 2005
Location: Piedmont, Oklahoma
Posts: 163
Likes: 0
Received 0 Likes
on
0 Posts
Piece of cake, it's easy to get to. Make sure to replace the thermostat at the same time. Might as well check belts and hoses since they'll be off. Good luck.
#3
Registered User
Once you remove the belt and drain the coolant, the rest is simple. The pump utilizes 2 - 10 mm bolts. The pump housing to block surfaces are sealed with an o-ring that comes with the new pump. Make sure to install the new pump with the weephole facing toward the ground. Once the new pump is on and the 2-10mm bolts are snug, torque the bolts to 18ft.lbs.
Thread
Thread Starter
Forum
Replies
Last Post
ted_pulliam
24 Valve Engine and Drivetrain
10
10-15-2009 08:24 AM
RamWheelsBy4
3rd Gen Engine and Drivetrain -> 2003-2007
5
04-11-2007 04:43 PM
Gene Peterson
1st Gen. Ram - All Topics
15
01-07-2006 02:32 PM