Turbo upgrade ?????
#1
Registered User
Thread Starter
Join Date: Sep 2007
Location: Martinsburg, WV
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Turbo upgrade ?????
Based on my current mods what turbo upgrade do any of you recommend, yes I searched but nothing with my setup poped up. I do plan on upgrading injectors and tranny (when it breaks) but I am looking at the turbo 1st?? what do you all think???
#5
Registered User
Join Date: Jun 2007
Location: Schaefferstown, PA
Posts: 743
Likes: 0
Received 0 Likes
on
0 Posts
If you go with a bigger set of injectors, I'd go with a set of 150hp stix. You cant go wrong with F1 Mach 4's or DDP's 150hp injectors. As for the turbo, either an Industrial Injection SPS 62/14, or HTT 62/14 if you go with the bigger sticks. However, at that level, I would definately consider head studs and either o-rings or a cometic gasket.
#6
Registered User
Thread Starter
Join Date: Sep 2007
Location: Martinsburg, WV
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
thanks for the input guys im deffinatly gonna find the right place on the net to buy this stuff cheaper than the actual companies sell them for
#7
Registered User
Join Date: Feb 2008
Location: Baldwin, Kansas
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
I have a simular truck, with the mach 4's, which I might add are good enough to start whole other thread about.
I was looking for around 500-550hp, and do some towing. I went with a HTT SS 64/71/13.
Spool up is just a tiny bit lagy, but I also am NOT running any tuning until I can get a Quad A. I did have a Smarty and a 140hp box on it for a long while and it spooled great. I could clean up every bit of smoke.
The 64 is more than likly bigger than most run, but I don't want smoke.
A 62 would be perfect. I went with HTT, because of the SS and 13 snail. There are several good 62's on the market from many companys.
I was looking for around 500-550hp, and do some towing. I went with a HTT SS 64/71/13.
Spool up is just a tiny bit lagy, but I also am NOT running any tuning until I can get a Quad A. I did have a Smarty and a 140hp box on it for a long while and it spooled great. I could clean up every bit of smoke.
The 64 is more than likly bigger than most run, but I don't want smoke.
A 62 would be perfect. I went with HTT, because of the SS and 13 snail. There are several good 62's on the market from many companys.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
NJTman
1st Gen. Ram - All Topics
17
07-04-2012 11:55 PM
LilBigd02
3rd Gen High Performance and Accessories (5.9L Only)
7
02-28-2007 08:31 PM
12valve
3rd Gen High Performance and Accessories (5.9L Only)
14
02-22-2007 09:07 PM