Tone ring mod and Rokktech?
#1
Registered User
Thread Starter
Join Date: Nov 2006
Location: Muskego, WI
Posts: 531
Likes: 0
Received 0 Likes
on
0 Posts
Tone ring mod and Rokktech?
I modified my FCA & now the timing rattle is gone, my mileage is down a little, but my low end is alot better I know that increasing pressure adds timing, but I was hoping to add maybe another 2*-4* with the TRM to get it back some mpg.
Does anyone think/know if I'll have any problems with the addition timing from the TRM?
Does anyone think/know if I'll have any problems with the addition timing from the TRM?
#2
Registered User
Some have tried the tone ring with the Rokktech and said the performance and economy is worse. Too much static timing.
I say try it, if it doesn't work crank one or the other back down.
MikeyB
I say try it, if it doesn't work crank one or the other back down.
MikeyB
#3
Banned
Join Date: Sep 2005
Location: pacific north wet
Posts: 758
Likes: 0
Received 0 Likes
on
0 Posts
i prob wouldnt bother..... if your running a quad plus added the roctech or dit the tone ring your prob on the edge as it is.. you might not hear it, but you advance to much and milage will go down hill quick. presurs will be to high to early in the cycle.
Thread
Thread Starter
Forum
Replies
Last Post
matego
3rd Gen High Performance and Accessories (5.9L Only)
3
05-18-2008 08:25 PM
Rollin' Smoke
3rd Gen Engine and Drivetrain -> 2003-2007
20
05-25-2007 03:49 PM
spankdog
3rd Gen High Performance and Accessories (5.9L Only)
7
01-18-2007 09:39 AM
03CumminZ4X4
3rd Gen High Performance and Accessories (5.9L Only)
4
01-16-2006 10:11 AM
Big Bob
3rd Gen High Performance and Accessories (5.9L Only)
4
11-08-2005 12:41 AM