Question about my setup
#1
Question about my setup
I have a 2000 24valve a quadzilla xzt, bd 75 horse injectors, and a bd super b single turbo. What kind of boost should i be seeing? With the wastegate line clamped i can only get about 33 pounds max. I have done a boost leak test with an adapter that i made. I can hear no leaks in the intercooler or boots. I think i should be seeing more boost, or am i thinking too high of my setup. Any input would be appreciated.
#5
Registered User
At 350 hp, with the factory HY-35, I think I pulled 38 psi or so. (much smaller turbo). How are EGT's at WOT. If not high, you're in good shape.
RJ
#7
Registered User
That turbo moves a lot of air for it's size, as evidenced by your egt's.
Room to grow, hp-wise, which is excellent. If you had a leak, your egt's would be much higher.
Not maxing out your turbo (about 40 psi) means cooler, denser air charge..... Excellent.
RJ
Room to grow, hp-wise, which is excellent. If you had a leak, your egt's would be much higher.
Not maxing out your turbo (about 40 psi) means cooler, denser air charge..... Excellent.
RJ
Trending Topics
#8
Registered User
Join Date: Apr 2007
Location: SLC, Ut. 4,200 ft.
Posts: 990
Likes: 0
Received 0 Likes
on
0 Posts
X2. I have been impressed with my super B so far. With whats in my sig... playin around on the freeway with goin WOT, highest temp ive seen is 1204 at 35 lbs boost.
Which makes me exstatic.
Id say as long as you have the trans to hold it, IMO, your good to look at a bigger chip or injectors if your wantin more power.
Which makes me exstatic.
Id say as long as you have the trans to hold it, IMO, your good to look at a bigger chip or injectors if your wantin more power.
Thread
Thread Starter
Forum
Replies
Last Post
hellotbone
Performance and Accessories 2nd gen only
18
06-25-2003 01:16 PM