overheating while backing
#1
Registered User
Thread Starter
Join Date: Dec 2003
Location: Battle Creek Michigan
Posts: 1,686
Likes: 0
Received 0 Likes
on
0 Posts
overheating while backing
Anyone ever expeirence overheating while backing trailer? yesterday while backing my 53' gooseneck trailer (in muddy terrain) in 4 wheel drive, the engine temp went up to 250 and engine temp light came on ?
Wasn't pushing it or spinning wheels? cooled right down as soon as i was done---coolent levels ok
should we be using 4 wheel or 4 wheel lo ?
Wasn't pushing it or spinning wheels? cooled right down as soon as i was done---coolent levels ok
should we be using 4 wheel or 4 wheel lo ?
#2
Registered User
Join Date: Oct 2004
Location: St Augustine, Florida
Posts: 755
Likes: 0
Received 0 Likes
on
0 Posts
Any auto will overheat while backing. No airflow over the cooler and working it harder not locked. Lots of heat from fluid shear. I put a 10 inch Derale fan in front of my cooler that I control from the cab. Turn it on while backing and in traffic while towing. Helps a lot.
#3
Administrator ........ DTR's puttin fires out and workin on big trucks admin
My tranny temp goes to 250 when backing my 5ver up my driveway, but my engine coolant temp stays pretty steady at 190-210, never any more than 210*.
The torque converter has to work twice as hard in reverse than it does in drive, thus the extra heat.
Tim
The torque converter has to work twice as hard in reverse than it does in drive, thus the extra heat.
Tim
#4
Registered User
Join Date: Apr 2003
Location: Cummins Technical Center, IN
Posts: 6,564
Likes: 0
Received 6 Likes
on
5 Posts
Herb, the engine is overheating when you back up because the fan is trying to push air out the front of the truck.
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
#6
Registered User
4Low is good...if you can use it. When I had problem it was a 9000 lb camper, backing up a long uphill gravel drive. 4Low had too much torque and any throttle would just spin wheels!
RJ
Trending Topics
#8
Registered User
Herb, the engine is overheating when you back up because the fan is trying to push air out the front of the truck.
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
I glanced over this real quick and then had to re-read it. Pretty good.
#10
Registered User
Join Date: Aug 2003
Location: Denver, CO.
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Herb, the engine is overheating when you back up because the fan is trying to push air out the front of the truck.
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
#11
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
Join Date: Jan 2005
Location: Ohio: Home of the disappointing sports teams
Posts: 2,187
Likes: 0
Received 0 Likes
on
0 Posts
Herb, the engine is overheating when you back up because the fan is trying to push air out the front of the truck.
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
#12
Registered User
Thread Starter
Join Date: Dec 2003
Location: Battle Creek Michigan
Posts: 1,686
Likes: 0
Received 0 Likes
on
0 Posts
#13
Registered User
Got to go with the 4low answer here too. If you can use that. I put a 2 low kit on my truck several years ago for the same problem and it totally cured it. I dont think there is 2 low kit for your year though but am unsure of about that.
#14
Muted one day, Banned the next....... Ah the life of a DTR 1%'er
Join Date: Jan 2005
Location: Ohio: Home of the disappointing sports teams
Posts: 2,187
Likes: 0
Received 0 Likes
on
0 Posts
#15
Registered User
Herb, the engine is overheating when you back up because the fan is trying to push air out the front of the truck.
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?
Since the engine is turning the opposite direction, I'd also assume that the coolant flow is not optimized, allowing the heads to get too hot.
Maybe they can come up with a way to keep the engine spinning the same direction all the time someday?