Draw-Tite Class IV Hitch
#1
Registered User
Thread Starter
Join Date: Aug 2006
Location: Kent, WA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Draw-Tite Class IV Hitch
Anybody using this Class IV Draw-Tite Ultra Frame Receiver hitch, part #41929? I'm hoping that maybe somebody has some pictures that are more specific than what Draw-Tite offers before I decide if I want to buy it.
Thanks,
*****
Thanks,
*****
#3
Just a plain ole guy
Footnote on it says :KL: Hitch is designed to attach beneath the OEM hitch.
Surely they are talking the hole in the bumper, not a second receiver hitch.
I helped a buddy put on on his Nissan and it bolted right up. Eas install. I would expect this to be the same. You should find a plug ready to receive the 7 way plug. Get the correct part for that so there is NO wire spicing. Also smeear a little dielectric grease on the plug connections. It'll keep it tight and clean and dry.
Surely they are talking the hole in the bumper, not a second receiver hitch.
I helped a buddy put on on his Nissan and it bolted right up. Eas install. I would expect this to be the same. You should find a plug ready to receive the 7 way plug. Get the correct part for that so there is NO wire spicing. Also smeear a little dielectric grease on the plug connections. It'll keep it tight and clean and dry.
#4
Registered User
Thread Starter
Join Date: Aug 2006
Location: Kent, WA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
That would be nice. If you find one let me know.
That is one of the things I would like to know more about. I don't really want anything that hangs lower than the stock receiver.
*****
*****
Thread
Thread Starter
Forum
Replies
Last Post