Dragon flow for the street
#1
Registered User
Thread Starter
Join Date: Feb 2007
Location: Buckhead,GA.
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Dragon flow for the street
I have a buddy that wants to take his hot rod vp44 off and put a dragon flow on in its place. He has edge 130 inj,comp box, modded trans. How is this setup going to act on the street with a stock turbo?
Trending Topics
#10
if he isnt running something bigger then a 64 then a dragon mite be a little to much fuel, but it is very street able. It is capable of alot of power but you are going to need the right setup to be able to get the power out of it. Take your typical SO is good for what 550-600HP when the dragon i would say is good for 700-800 on fuel only. But if you dont have the mods to get above 600 then whats the point of the dragon???
Stock turbo HAHAHA! Tell him to leave the VP on there and get a turbo first, wait for that vp to crap out then get the dragon. You will not be impressed with the dragon until you are maxing out the capabilities of the SO first.
Stock turbo HAHAHA! Tell him to leave the VP on there and get a turbo first, wait for that vp to crap out then get the dragon. You will not be impressed with the dragon until you are maxing out the capabilities of the SO first.
Thread
Thread Starter
Forum
Replies
Last Post
BigJohnston
3rd Gen High Performance and Accessories (5.9L Only)
5
10-21-2009 08:58 AM
fordkiller43
Performance and Accessories 2nd gen only
1
06-06-2009 01:08 PM
ralphyboy
3rd Generation Ram - Non Drivetrain - All Years
10
01-17-2008 08:35 PM
8mpg
3rd Gen High Performance and Accessories (5.9L Only)
8
05-22-2006 01:35 PM