45 psi?
#1
45 psi?
I was looking at this lift pump http://www.dieselsite.com/index.asp?...ROD&ProdID=475 Is it too much for the injection pump, or will it simply bypass the extra pressure back to the fuel tank?
#4
Registered User
I have been running this pump for 5 or 6 years. It is designed for operation with diesel and uses a stainless steel pump mechanism. It is rated for 40 psi but will easily top 100 psi. A bypass regulator will be required. It uses the diesel fuel flowing through it for cooling.
It is a good idea to use a resilient mount when bolting to the frame. It can be loud. Also don’t skimp on hose size. This pump moves fuel and must have a -10 AN pick up tube (5/8”).
I use a circuit to slow the pump down to limit the pressure but that is another story. If interested, search for PWM pump controller on this site.
It is a good idea to use a resilient mount when bolting to the frame. It can be loud. Also don’t skimp on hose size. This pump moves fuel and must have a -10 AN pick up tube (5/8”).
I use a circuit to slow the pump down to limit the pressure but that is another story. If interested, search for PWM pump controller on this site.
Thread
Thread Starter
Forum
Replies
Last Post
38 Cigarette
24 Valve Engine and Drivetrain
16
08-28-2015 11:27 PM
nrussell
3rd Gen High Performance and Accessories (5.9L Only)
4
07-23-2008 08:58 PM
Tommy93w350
24 Valve Engine and Drivetrain
5
08-07-2007 12:15 PM
Dave88LX
Performance and Accessories 2nd gen only
15
09-04-2006 09:30 PM
ckennedy
3rd Gen Engine and Drivetrain -> 2003-2007
8
09-29-2004 05:06 PM