Looking for a 91-93 crank sensor (pigtail) female electrical connector cut from a old harness. This needs to fit the male plug that I already have mounted.
Here is a picture of the male plug I have which it needs to plug into.





Thanks,

 

That part of the Harness is also part of the Trans harness if that will help .

 

Thanks for the information. I received the pigtail and wired it all up and it didn't work. The Tach would read up to 1400 rpm and lose sync. I installed a ISSPO Magnetic pickup and all is well. Maybe something wrong with the used pickup I had, don't really know what the output was. It was just another failed experiment. No big deal.


Thanks,