When you pull doubles how do you set up the brakes? Do you have to have two controllers? One for each trailer? That could make for a wiring nightmare.

 

I have seen a couple of guys do that and as to a wiring nightmare its not its just one addtional wire, run it through the accessory pin on a 7 pin plug thne use that wire to run all the way to the rear and use for the brakes. I didnt do it that way i just adjusted my brakes about 1/32 tighter on the rear trailer than the center trailer, so it would tug tight first, just ever so little that you would barely notice it but on ice you could see the rear brakes would engage and drag just a little before the front trailer tires would quit rotating. Also the rear trailer had dual 6k axles so between it and the 8k axles under the GN the braking was there.

 

Dusty, got any pics of that tandem-combo going uphill offroad in the snow? I liked that pic you posted the other day. Big Thumbs up!

 

No i kept that one combo on the road, I don't have ***** that big, anyways I sold it when i left Montana for California I already miss it wish i ahd kept it now.


You mean this picture where i was smoking crack and spinning tire chains in the snow

C'ya

Dusty