I just purchased a ps62/65/14 and 100hp jammer nozzles. and I will be upgrading my edge comp to a drag comp.
besides my head gasket what can i expect to break next.
will my trans hold the new power ok if so how much will it hold with out billet shafts.
Ps. try not to scare me to bad

 

Depends what you do with it. Normal driving and a little hottrodding you should be fine. Stay clear of the boosted launches. Thats where you will break input shafts. Otherwise if you keep your boost below 45psi your stock hg should last. My htt66 is pushing 60psi, but I know my head gasket will blow before long.

 

x2 stay away from boosed launches, wish I would of had the money for a flex plate and an input shaft when I got my trans built.

 

Just try to set boost at 40. The HG is the weak point. Also try to let the water temp come up before flogging on it.