what materials do i need ??
Thread Starter
Registered User
Joined: Apr 2005
Posts: 179
Likes: 0
From: okla
what materials do i need ??
I need to install a fuel preasure guage. I am thinking of coming off the port on the vp44. What do i need to buy and which guage ? I would like to use black so it will look natural in the truck. I do not have any mods. Just want to monitor the lp pressure. Just installed new lp getting 16 psi at idle. I used an old refrigeration guage on the port on the vp to get thiis pressure. Might get boost guage later. I do not do much pulling just small travel trailer and 16 foot stock trailer.
Registered User
Joined: Mar 2004
Posts: 93
Likes: 0
From: ILL
call kyle graham http://www.extremedieselperformance.net i bought a isspro and all the stuff to putit in for like 100 bucks
Registered User
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Re: what materials do i need ??
Originally posted by 2 busy
What do i need to buy and which guage ? Just want to monitor the lp pressure.
What do i need to buy and which guage ? Just want to monitor the lp pressure.
If your anywhere near OKC, see/talk to City Muffler. They advertise here, nice people, have good prices and can point you in the right direction. http://www.cmpchips.com/index.html
RJ
Thread Starter
Registered User
Joined: Apr 2005
Posts: 179
Likes: 0
From: okla
I dont think 4 hours away from OKC is concidered close.I'm down in the southeast area. Nothing is really close around here. About an hour to a decent store of any kind. thats doing 65 mph.
Thread
Thread Starter
Forum
Replies
Last Post
BothellDiesel
3rd Gen High Performance and Accessories (5.9L Only)
1
Feb 3, 2007 07:26 AM
SuperDave4x4
Performance and Accessories 2nd gen only
4
Jun 21, 2004 06:10 PM
dcorneli
3rd Generation Ram - Non Drivetrain - All Years
1
Jan 27, 2004 11:26 AM