Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

What is the "Correct" Tire Air Pressure ???

Old Mar 21, 2006 | 04:27 PM
  #1  
Katmandu's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 662
Likes: 1
From: Wetumpka, Alabama
Question What is the "Correct" Tire Air Pressure ???

I know the placards placed on the driver's side door jam calls for "Recommended" air pressure from a vehicle's manufacture.

As you know, tire manufacturers offer a Maximum air pressure rating based on a given tire's Load.

I need to know if there is in fact a SAFE RANGE for air pressure for tires.

For instance. On a 98 Dodge Ram 2500 4x4, the truck manufacturer's label states that the OEM "E" Load 245/75-16 tires be set at "Recommended" 65lbs.

Tire manufacturer's give the Maximum Rating for E Load 245/75-16 tires of 80psi (Firestone Transforce A/Ts).

So is there a "SAFE" Air pressure RANGE of 65 - 80 psi ??
Reply
Old Mar 21, 2006 | 05:16 PM
  #2  
PHD_WHITETRUCK's Avatar
Registered User
 
Joined: Mar 2006
Posts: 24
Likes: 0
i have an 02 with load range e and i run 80 pounds and when i ran Ds i ran them at 80 also
Reply
Old Mar 21, 2006 | 06:03 PM
  #3  
CJSamples's Avatar
Registered User
 
Joined: Nov 2005
Posts: 56
Likes: 0
My door tag says 60 in the front and 55 in the back....I think those are the right numbers. Two new tires installed today and they aired the fronts for 60.

Chris
Reply
Old Mar 21, 2006 | 07:52 PM
  #4  
micah's Avatar
Registered User
 
Joined: Sep 2005
Posts: 160
Likes: 0
From: Austin, TX
I thought mine said 55 up front and 80 in the rear (for 245/75/16)... but those are the pressures that allow for max gross weights.

question: is 245/75/16 the stock size on a 2wd? my truck has 265/75/16 10ply E's that were on it when I bought it.
Reply
Old Mar 21, 2006 | 07:57 PM
  #5  
RickCJ's Avatar
Registered User
 
Joined: Dec 2002
Posts: 1,170
Likes: 0
From: Hollidaysburg PA
Originally Posted by Katmandu
I know the placards placed on the driver's side door jam calls for "Recommended" air pressure from a vehicle's manufacture.

As you know, tire manufacturers offer a Maximum air pressure rating based on a given tire's Load.

I need to know if there is in fact a SAFE RANGE for air pressure for tires.

For instance. On a 98 Dodge Ram 2500 4x4, the truck manufacturer's label states that the OEM "E" Load 245/75-16 tires be set at "Recommended" 33lbs.

Tire manufacturer's give the Maximum Rating for E Load 245/75-16 tires of 80psi (Firestone Transforce A/Ts).

So is there a "SAFE" Air pressure RANGE of 33 - 80 psi ??
33psi???? Most diesel are 55-60 psi in the front!
Reply
Old Mar 21, 2006 | 08:06 PM
  #6  
atch's Avatar
Registered User
 
Joined: Jan 2005
Posts: 128
Likes: 0
From: Illinois
Look at the side wall of the tire. The tire manufacturer put the reccomended air pressure on the tire, I would go by that before the sticker on the door.
Reply
Old Mar 21, 2006 | 08:19 PM
  #7  
Katmandu's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 662
Likes: 1
From: Wetumpka, Alabama
Arrow

Originally Posted by RickCJ
33psi???? Most diesel are 55-60 psi in the front!
I'll double check it when I head out for work tonight, but I know its not that high.
Reply
Old Mar 21, 2006 | 08:20 PM
  #8  
Katmandu's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 662
Likes: 1
From: Wetumpka, Alabama
Arrow

Originally Posted by micah
I thought mine said 55 up front and 80 in the rear (for 245/75/16)... but those are the pressures that allow for max gross weights.

question: is 245/75/16 the stock size on a 2wd? my truck has 265/75/16 10ply E's that were on it when I bought it.
My door sticker says 245/75-16s E Load and mine is a 98 4x4 CC.
Reply
Old Mar 21, 2006 | 08:22 PM
  #9  
Katmandu's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 662
Likes: 1
From: Wetumpka, Alabama
Exclamation

Originally Posted by atch
Look at the side wall of the tire. The tire manufacturer put the reccomended air pressure on the tire, I would go by that before the sticker on the door.
FYI, that is the MAXIMUM air pressure, NOT the recommended air pressure.

.
Reply
Old Mar 21, 2006 | 08:24 PM
  #10  
RickCJ's Avatar
Registered User
 
Joined: Dec 2002
Posts: 1,170
Likes: 0
From: Hollidaysburg PA
Originally Posted by atch
Look at the side wall of the tire. The tire manufacturer put the reccomended air pressure on the tire, I would go by that before the sticker on the door.


The tire manufactuer puts maxium tire pressure on the side, not the recomended pressure, that is on the drivers door!!! Go by the door!!!!!
Reply
Old Mar 21, 2006 | 08:34 PM
  #11  
phox_mulder's Avatar
Administrator
 
Joined: May 2002
Posts: 6,522
Likes: 4
From: Sandy, Utah
Originally Posted by RickCJ
The tire manufactuer puts maxium tire pressure on the side, not the recomended pressure, that is on the drivers door!!! Go by the door!!!!!
That only applies to the tires that came on the truck from the factory,
or exact replacements.

My door panel says I have 245/75R16 E's,

I bought my truck brand new off the lot with 265/75R16 E's,

It now has 315/75R16 D's on it.

That door panel is a completely useless piece of tin now.

phox
Reply
Old Mar 21, 2006 | 09:19 PM
  #12  
Katmandu's Avatar
Thread Starter
Registered User
 
Joined: Dec 2005
Posts: 662
Likes: 1
From: Wetumpka, Alabama
Exclamation

Originally Posted by phox_mulder
That door panel is a completely useless piece of tin now.

phox
That's true.

So NOW what is the "Recommended" air pressure for your 315s ??

I have yet to find and definitive answer as to what the "Recommended" air pressure is for running oversized tires.

The only real info/reference I've found is what the MAXIMUM air pressure is and that is molded into the tire's sidewall.

Anyone know of a definitive reference source for what SAFE/RECOMMENDED air pressures "should" be for running oversized tires ??
Reply
Old Mar 21, 2006 | 09:47 PM
  #13  
TRCM's Avatar
Registered User
 
Joined: Jul 2005
Posts: 698
Likes: 1
From: Newport News, VA
For me, the recommended pressure is what ever pressure it takes to get a FULL contact patch on the tires.

On my current tires, that is 65 psi front, and 35 psi rear.

Now, when I am towing, I bump the rears up to 60. No need to run them that high unloaded.

Run what you feel comfortable with.
Reply
Old Mar 21, 2006 | 09:55 PM
  #14  
Sea:\>Drive's Avatar
Registered User
 
Joined: Jun 2005
Posts: 1,110
Likes: 0
From: Middle River, MD
Originally Posted by micah
question: is 245/75/16 the stock size on a 2wd? my truck has 265/75/16 10ply E's that were on it when I bought it.
245's are stock unless you have the "towing package" which gives you the larger 265 tires. Congrats, you have the tow package (which is different than the camper package which gives you a helper spring for slide in camper).
Reply
Old Mar 21, 2006 | 09:56 PM
  #15  
phox_mulder's Avatar
Administrator
 
Joined: May 2002
Posts: 6,522
Likes: 4
From: Sandy, Utah
Originally Posted by Katmandu
That's true.

So NOW what is the "Recommended" air pressure for your 315s ??

I have yet to find and definitive answer as to what the "Recommended" air pressure is for running oversized tires.

The only real info/reference I've found is what the MAXIMUM air pressure is and that is molded into the tire's sidewall.

Anyone know of a definitive reference source for what SAFE/RECOMMENDED air pressures "should" be for running oversized tires ??
Me personally, anything less than maximum makes the tires way too squirrely, and bulgey around the sidewall.
50psi in front (max according to the tire), 45 in back.

No, I will never put D's on my truck again,
as soon as these are worn down a bit, they're coming off.


phox
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 12:38 AM.