Yes, Rich was who I got my setup from. Great guy.

 

Hey Paul, long time no speak. How's it? Hey, did you ever get the boost elbow installed after the 1.6s? I'm still on the fence of which injectors to buy.
Still.


Thanks, Mike

 

Hey Mike, I thought I told you that I clamped the wastegate tube. Works like a charm, no need for an elbow. I get up to 24 psi boost and lower EGTs. Love the 1.6s, gives me power to run any hill in 5th gear, or in 4th towing.

 

Nice! Thanks. Last we "spoke" I think you said you were going to clamp it but perhaps I didn't check my PMs. That's good to hear. So 24 psi is all you get huh? I would have thought you would have gotten a bit more from what others have said about their injector swaps and running boxes with boost foolers like ours. Oh well, as long as it's controlable for you that's what matters.

 

I have a van aaken serial #20445 and it hooks to the pump. I have no switch there are 2 orange leads coming off the box with a gray plug on it that isn't hooked to anything, is that were my switch needs to be wired in at? The 2 white leads are crimped in to the MAP sensor. Box came on truck so my guess is its just set to level 2. Do you have and direction or diagrams of how I could wire a switch in.

 

Can anyone help with the switch?