Tst has one for 288.00 where as DTT has one for 49.00? Is the TST that much better or are they just throwing the chest out. Im not going to buy a valve body for 495.00. Im sure they do great work but I could just use the cash toward converter. Would like to hear from those using them. Thanks in advance.

 

get the modified dunrite kit from Dave at goerend's

 

I'm running a DTT valve body in my truck right now. I paid $450 for it. It held a comp (wire tapped) and 275 injectors great. Put down 371hp to the rear wheels with a KSB-1 turbo. I lugged the truck more times than I can count just to watch the smoke and it never once slipped. I'm now running 100+hp injectors and the comp in EZ mode and it's still holding. I did manage to slip it once but that was because I was stupid and hit the lockup switch to early and bogged the engine down to 1200rpm and floored it. Not a good idea. I highly recommend the DTT valve body. Nothing against Dave. He's a great guy, but I have no experience with his product. Call Stefan up at DTT and tell him what you want to do with your truck and what not and he'll build you anything you want.