TC Lock Up Switch
#31
Registered User
Join Date: Nov 2002
Location: outside of Duluth MN
Posts: 1,234
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by BigBlue
Your not supposed to turn it on until after it's in 2nd gear.
Your not supposed to turn it on until after it's in 2nd gear.
#33
Registered User
Mine is wired different. **** I wish I could find the schematic. I'm using a DPDT switch that is momentary on-off-momentary on. 3 relays are used.
Switch up locks the converter, stepping on the brake turns off that relay thus returning the TC back to stock operation. Switch in the middle is normal operation. And switch down turns off the relay again returning to stock operation.
I've taken this one step further and installed 2 LEDs, one that lights when the TC locks on it's own, and one that lights when I manually lock it.
There's a pic in my gallery that shows this installed in a Scotty pod. It's not a close up though.
Switch up locks the converter, stepping on the brake turns off that relay thus returning the TC back to stock operation. Switch in the middle is normal operation. And switch down turns off the relay again returning to stock operation.
I've taken this one step further and installed 2 LEDs, one that lights when the TC locks on it's own, and one that lights when I manually lock it.
There's a pic in my gallery that shows this installed in a Scotty pod. It's not a close up though.
#34
Originally posted by justinp20012500
When you install the swithc per TST instructions you tc will perform just like the switch was never there.
Yes leave the switch in the ungrounded (off) postion and the truck's TC will perform just like stock.
When you install the swithc per TST instructions you tc will perform just like the switch was never there.
Yes leave the switch in the ungrounded (off) postion and the truck's TC will perform just like stock.
#35
Registered User
Join Date: Dec 2003
Location: Richmond, Tx. (Houston)
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Not sure if this link will work. I did a little PDF on my setup. I will try to leave it up for a while to give folks a chance at it. If anything it shows where to find the wire and where to put the jumper.
http://home.houston.rr.com/gtsdave/C...y%20Switch.pdf
I think I would like to try the DPDT switch setup though. I like the way it sounds. If yall find the schematic please post it.
-Dave
http://home.houston.rr.com/gtsdave/C...y%20Switch.pdf
I think I would like to try the DPDT switch setup though. I like the way it sounds. If yall find the schematic please post it.
-Dave
#37
After playing with the 2 wires on a 3 prong switch to see which one works, I finally got the switch working and all I can say is wow. I noticed an immediate difference. I didn't switch it on until I hit 40 and then I stood on it. Man it's nice not to have the tranny downshift and bang the rev limiter and then grab the next gear. This really is a simple mod. Now I just need to run the wires through the fire wall instead of the window.
#38
Originally posted by Mcmopar
So, You guys want the 3 relay one? The other one is in my "gallery"
So, You guys want the 3 relay one? The other one is in my "gallery"
BigBlue, So i guess you would recommend this? So I guess I should do this, that way when I get my tranny its already installed. Yea more projects
#42
Registered User
Originally posted by MnTom
Maybe I am doing something wrong. With the jumper in it does not matter where the switch is and with it out it don't work either.................................
Maybe I am doing something wrong. With the jumper in it does not matter where the switch is and with it out it don't work either.................................
#43
Originally posted by Mcmopar
I put more schematics in my gallery this morning, along with a Q & A sheet. I also have the 3 relay info in there now too.
Good luck and enjoy.
I put more schematics in my gallery this morning, along with a Q & A sheet. I also have the 3 relay info in there now too.
Good luck and enjoy.
#45
Registered User
Join Date: Dec 2003
Location: Richmond, Tx. (Houston)
Posts: 102
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Mcmopar
I put more schematics in my gallery this morning, along with a Q & A sheet. I also have the 3 relay info in there now too.
I put more schematics in my gallery this morning, along with a Q & A sheet. I also have the 3 relay info in there now too.
************************************************** ********************
Never mind!!! I got home and was able to view them on my home computer. THANKS!
-Dave