So riddle me this,got the brite box for my 01 sport from the folks for christmas and when went to hook it up I notice that my outter bulbs are working and not the inner bulbs but I still have hi and lo beams with or with out the brite. So is it possible my inner bulbs are burnt out? I looked as best as I can and cannot tell if the filaments are there they look like they are not,so on a sport the outter bulbs are hi and lo and the inner is hi? Second the instructions for the box say hook the ring terminal wire to the neg but the genos web site says hook to possitive? and lastly how the hell do you get the bulbs out

 

What is brite box?

 

No the inner lights are working as there suppose to. Thats your high beam. You should check to see if your getting 12V?

 

Well ok my pickup should have quad hi beams,the outters are hi/lo and the inner is hi. I'm for sure its got power because all feues are good and relays too,I've never in the 9 years of owning this truck put bulbs in it so I'm buying the bulbs for the inner ones today and go from there because the brite box is hooked up correctly........

 

An overpriced device that makes you hi and lo beams come on at the same time.
All you need to make one yourself is an inline fuse, a relay and a bit of wire.