Well I got in my truck today and it seemed a little sluggish then I noticed the power levels weren't changing anything, 0-1-2 did but nothing above that.

I tried unplugging it and plugging it back in but still the same thing.
This exact thing happened a month after I got the adrenaline and after some testing the tech I talked to said it wasn't sending a signal to the pump wire, of course it was under warranty so I sent it back and they sent a new one and I was good to go.

That was five years ago and I don't remember what I tested, I think maybe it was voltage or maybe some type of resistance on the pump tap wire but I couldn't remember, so I figured I'd just call and talk to a tech again and send it in for repairs if needed. Wrong, they went out of business last month!

I found a few new ones on Ebay and I really liked my adrenaline but want to test to make sure that's my problem before ordering another box.

Anybody know what I need to test on the wire going to the pump?
I've dealt with bad pump wire connections before and this isn't acting like that, not to mention it's soldered and in heat shrink, but first thing I'll check is that I have good continuity.

Truck is the '01 in my sig.

 

One more thing, if I get another quad does anybody know where I can get tunes and the software?
I've been running the 3000 tune on mine for a long time and would hate going back to a 1000 that comes on them, somebody has to still have a bunch of them.

 

CumminsForum has a sticky with all the tunes.