Performance and Accessories 2nd gen only Talk about Dodge/Cummins aftermarket products for second generation trucks here. Can include high-performance mods, or general accessories.

Quad Adrenaline Beta Testing....

Old Mar 7, 2008 | 04:47 PM
  #1441  
paulb's Avatar
Registered User
 
Joined: Jan 2005
Posts: 592
Likes: 1
From: Klamath Falls, OR
Originally Posted by Coon Smile
hey paul...you notice any fueling issues like the some of us other guys are experiencing with bigger sticks? or was it smooth through out the entire rpm range?

With the production tune and WOT it's smooth all the way. I get a very bad surge at part throttle (about 7 psi of boost).

Paul
Reply
Old Mar 7, 2008 | 04:53 PM
  #1442  
paulb's Avatar
Registered User
 
Joined: Jan 2005
Posts: 592
Likes: 1
From: Klamath Falls, OR
Originally Posted by RowJ
Great report, Paul! Thanks for the input. Try PL08,,,was stronger for me.
Wish you could have gotten some 1/4 mile data also.
What is your race weight?

RJ
I agree that PL08 would have been better, but I do get some pump shudder (not bad), on anything higher then PL07. The pump shudder is nothing like the Redline or TST comp does, though. I just wanted to pick a power level, and then figure out how to make it launch well.

Paul
Reply
Old Mar 7, 2008 | 05:47 PM
  #1443  
qzilla's Avatar
Registered User
 
Joined: Jun 2003
Posts: 3,741
Likes: 0
Originally Posted by hink
That's what they said 2 weeks ago.
Some of the Pulse monitors shipped today, the rest of the beta units will ship on Monday.
Reply
Old Mar 7, 2008 | 06:57 PM
  #1444  
swmnkdinthervr's Avatar
Registered User
 
Joined: Nov 2005
Posts: 451
Likes: 0
From: Springfield Va.
Originally Posted by qzilla
Some of the Pulse monitors shipped today, the rest of the beta units will ship on Monday.
Cool...does that mean I'll be getting a call soon?

Tranny will be back in tomorrow!
Reply
Old Mar 8, 2008 | 07:38 AM
  #1445  
whitediesel's Avatar
Registered User
 
Joined: Feb 2007
Posts: 35
Likes: 0
From: Ct.
just incase nobody noticed, all the tunes on the website have been updated
3/7/08
Reply
Old Mar 8, 2008 | 08:39 AM
  #1446  
xtoyz17's Avatar
Registered User
 
Joined: Nov 2006
Posts: 2,333
Likes: 0
From: Rochester, NY
Originally Posted by whitediesel
just incase nobody noticed, all the tunes on the website have been updated
3/7/08
Could be an expensive day
Reply
Old Mar 8, 2008 | 10:33 AM
  #1447  
qzilla's Avatar
Registered User
 
Joined: Jun 2003
Posts: 3,741
Likes: 0
The tunes are just updated to include the warmup flashing fix, the intermittent power on levels above PL07 and it also solves the problem where it goes to PL10 when it comes out of warm up if you mess with the buttons while in warm up.
Reply
Old Mar 8, 2008 | 11:23 AM
  #1448  
xtoyz17's Avatar
Registered User
 
Joined: Nov 2006
Posts: 2,333
Likes: 0
From: Rochester, NY
Quad, this may seem weird, but can you tell me what pin the brown wire for the temp sender goes to on the main harness for the adrenaline? I had to blast through a snow bank a little while ago and apparently the weak link was the main plug itself and not one of my zip ties
Reply
Old Mar 8, 2008 | 11:36 AM
  #1449  
xtoyz17's Avatar
Registered User
 
Joined: Nov 2006
Posts: 2,333
Likes: 0
From: Rochester, NY
I *think* it's pin 14. Is that right? Next question. Where can I get a metal plug that will fit into the adrenaline plug? Apparently it took the metal connector right out of the harness, and then that proceeded to fall off in the road somewheres.
Reply
Old Mar 8, 2008 | 02:33 PM
  #1450  
RowJ's Avatar
Registered User
 
Joined: Apr 2004
Posts: 8,234
Likes: 1
From: Texas/Oklahoma Border
Originally Posted by qzilla
The tunes are just updated to include the warmup flashing fix, the intermittent power on levels above PL07.....
I tried the new ADR1005. Flashes PL 0 till 170*... just right.... But no high Idle

Tried new ADR1003. No high idle. RPM tries to climb, goes to 925 after 2 min then settles back to idle. Tries again for 3-4 sec, settles back to idle. Keeps going like this.

Previous ADR1003 tune did go to high idle one time....after trying from 2 min to 3 min before going to 1200 rpm. Could never get to 1200 rpm again.

EDIT 4:30 - Went to store and left CTD running (new ADR1003).
After 3 min (not 2) truck kicked right up to 1200rpm. Tested this when I got home ...did it again??

RJ
Reply
Old Mar 8, 2008 | 02:43 PM
  #1451  
xtoyz17's Avatar
Registered User
 
Joined: Nov 2006
Posts: 2,333
Likes: 0
From: Rochester, NY
I also had issues. The new 2018 tune didn't do the turbo timer. 3 shut offs, 3 times it didn't stay running.

Gonna try a few other tunes now.
Reply
Old Mar 8, 2008 | 03:06 PM
  #1452  
qzilla's Avatar
Registered User
 
Joined: Jun 2003
Posts: 3,741
Likes: 0
I had a couple of guys tell me this. I am working on checking the tunes out to see if they forgot to turn some of this stuff back on?
Reply
Old Mar 8, 2008 | 03:10 PM
  #1453  
J Lent's Avatar
Banned
 
Joined: Apr 2007
Posts: 3,309
Likes: 1
From: East Millsboro, PA.
Originally Posted by qzilla
I had a couple of guys tell me this. I am working on checking the tunes out to see if they forgot to turn some of this stuff back on?
The more that I drive the tune that you sent me, the more I like this box. Great work quad!!! I can't wait for some comp tunes.
Reply
Old Mar 8, 2008 | 03:55 PM
  #1454  
hink's Avatar
Registered User
 
Joined: Apr 2006
Posts: 695
Likes: 0
Originally Posted by qzilla
Some of the Pulse monitors shipped today, the rest of the beta units will ship on Monday.
Thank you for the update.
Reply
Old Mar 8, 2008 | 03:56 PM
  #1455  
stroker4501's Avatar
Registered User
 
Joined: Dec 2006
Posts: 174
Likes: 0
From: Cheyenne
I just tried the new tunes i tried Adr2025 , ADR 2024 and 2018 without any luck with turbo timing or high idle. Another question does high work when it out of warm up mode? thanks Mario
Reply

Thread Tools
Search this Thread

All times are GMT -5. The time now is 06:04 PM.