Who all is running one of this TC? I have found a good deal on one I believe and was wanting to know who else is runing one on here. I've hear good things about them so far. I talked to a guy that is running 600HP through his and its held up great so far. So any input on this TC is greatly appreciated.

The reason I'm looking at this TC is because its a triple disk and is in my price range and I cant afford a 1200 suncoast.

 

What's his warrenty like? Never heard of them.

 

Could very well be worth a try. The big companies now didnt start out with a good reputation; they had to earn it, and to do that, someone had to buy it. If you buy it be sure and let us know how it does.

Eric

 

Never heard of Precision Industries?
How about Dunrite & Goerend?
PI makes the converter cover & clutch plate for their 3 disc converters

 

Yeah that is what I meant I'm sorry. PI makes the front billet cover for it.

Justinp20012500 is selling one on here in the classifieds and is running one also. There is some more info on it here https://www.dieseltruckresource.com/...1&cat=8&page=2

 

I have a Precision in mine and so far so good. Low trans temps for sure.

 

Precision has been around and very good rep in the gas world,just kind of new to the diesel world!!!

 

how much are they going for and where from?

 

im a dealer for them.....but I have never sold one for a deisel. I can tell you that they have a 2 year warrantee, and (on gas applications) give one free stall change if you want it. I can also tell you that Im the only person that I know of that has hurt one.....it was way out of warrantee on a high 9 sec car......I sent it in, they still fixed it......they cited that they had never seen that happen before. I assume a failure that they were surprised about.

I love em, and they provide great drivability.

 

Is Precision Ind marketing a complete diesel converter?
Last I talked to Dave (Goerend), they were only vending the machined parts.

I've got about 2½ years on my Goerend converter. Perfectly balanced and no rattle from the clutch plate.

-John

 

I run one in my psd, holding at 420 hp 850 tq now, i have had it in the truck for almost 30k miles and 25 or so runs at track. Alot of psd's are running this tc, i believe that BTS uses this tc which would mean dockboy is running it and he's at 600+.

 

Precision Industries

And yes, BTS uses PI Converter's

I have 95k HARD miles on mine

 

I have a BTS in my PSD and it is a Precision Ind. made t/c. They have a very good reputation and yes they do sell complete t/c outright.
One thing to mention is there is more then one company going by that name, so be sure it is the exact same company Dockboy linked to.