Well guys, i had a meet on sat. and i was GIVEN an edge comp box from a diesel member who no longer had a need for it due to being a beta tester of the new quad adrenaline race box. Anyway, word had gotten out at the meet that i had lost my job the night before the meet (fri. night the 14th) and he was going to sell me this comp box, but he decided to give it to me due to the fact i had lost my job and Christmas was coming. Talk about a NICE GUY. Anyway, heres is a video of my newly acquired skills my truck can now perform



That is on EZ mode with MAP sensor plugged in


Will i get more smoke from EZ mode with MAP unplugged or is that only with wire tapped

 

It will smoke more with map unplugged untapped. That is part of the EZ mode that is controlled thru the ECM not wire tap. Looks like fun!

 

awesome, how much more smoke will be had by unplugging MAP, noticeably more or marginally more. Also, i unplug wiring harness from block end of MAP sensor right?

 

Good little belch at takeoff. Just unplug the whole setup from the block. leave the factory harness plugged into the edge.

 

unplug the data port connector by the lift pump too????

 

No just the map sensor at the back of the intake manifold.

 

I hope that you have a code reader, unplugging the map will set a error code.

 

Sometimes it does, sometimes not. My buddies 01' didn't set one at all and he had the edge comp.

 

im not overly concerned about it setting a code, i heard it does not set off the check engine light so as long as it doesnt do that im happy

 

Just giving you a heads up, have fun!!!

 

thanks and of course ill have fun!!!!!!!!!!!!!

 

Fun comes with the wire tap!!!

 

Yeah, seriously. What kinda Redneck are you?

 

nice score! it's good to have friends who care

 

yup, as far as tapping the wire, im gonna wait and do it right with a BD stealth plate.

Unplugged MAP today and i got double if not triple the smoke from the vid. yesterday!!!