I know it is only a matter of time before I pop a headgasket, especially after I get the twins on. So my question is anyone know of a good machine shop in the Hagerstown Maryland- Chambersburg PA area to put orings in a head. I know there is a place in York PA that will cut the grooves, but they use a JBH tool ( Ithink that is what its called) a hand spun tool to cut the grooves. I thought about just buying another head and getting it ready so when I get the chance I can just swap them and limit the down time on my truck.Any help would be greatly appreciated.
Joe

 

i would go 2 ats or haisley. when it comes to that stuff they are the best from what i hear

 

Well haisley is in Indiana and ATS is in Colorado a bit far for me to send my head to. I looking at the new heads that PDW sells but head orings and heavier springs is over $2500. I guess I'll just wait till the headgasket pops and just redo it.
Thanks
Joe

 

Don't know how close Enterprise Engine is to you but have heard good things and gotten good info on phone. They're in Ohio.

http://www.enterpriseengine.com

 

Give Jetpilot a call, he might be able help you out.

 

We do o-rings and fire rings. If I can naswer any questions please let me know.

Doug