I searched for flexplates and didn't come up with anything.

I'm rebuilding the trans in my 98 24v and have been told by a few people to replace the stock flexplate while I'm at it.

I was wondering if anyone has run one of these:

http://www.sfi-flexplate.com/

The price is fair, and it's beefed up over stock.

The next cheapest I've found is the BD one, at ~$400

 

I just saw them at http://www.goerend.com/

 

Laminated Reinforced Flex Plate $400.00
Billet Flex Plate $500.00



From Goerend.

 

Not a big problem on 2nd Gens, IMO. Very few broken, compared to 3rd Gen trucks. Your choice!

RJ

 

Yeah I know Goerend, Suncoast, etc all have them.

What I meant by I searched for flexplates and didn't find anything, was I searched on DTR regarding info on the flexplates and came up empty.

 

Decided to save my $$ and run the stocker. Rather that would break than the $750 input shaft

 

My partner ran 11.76 with 613hp on the stock flexplate, but if you did want one Reactor flexplates are good ones