I have the pump and am trying to find out what size fittings I need to install the pump and the best place to install it if any one has any useful information about this it would be greatly appreciated.

Thanks Roark

 

I can't remember the exact size of the fittings, I think that they are 3/8", but give Rod at Wildcat Diesel a call and he'll get you the right info. I put my Holley Black on the inside of the frame rail right under the driver side, next to the tranny cross member. Easy access and is hidden behind the frame from sight.

 

I used 2 pcs 3/8" straight into the holley and 1 90deg wber fitting (M12x1.5) with an ID of 10mm.
I also used 10mm rubber fuel line that's certified for biodiesel.

HTH

AlpineRAM