Installing guages!!! How???
Thread Starter
Registered User
Joined: Oct 2003
Posts: 105
Likes: 0
From: Prescott Valley, AZ
Installing guages!!! How???
Hey, my guages finally showed up. Now its time to install them. Does anybody know where I can find some detailed instructions for installation of Boost/Pyro/Tranny Guages???
Any tips before I get started???
Thanks,
Sam
Any tips before I get started???
Thanks,
Sam
Registered User
Joined: Sep 2003
Posts: 1,300
Likes: 0
From: stupid ohio
Re:Installing guages!!! How???
I know this one! Woo hoo! ;D
I used the instruction's given by TST at http://www.tstproducts.com/install_instruct.html
I only installed the pyro probe and fuel pressure, the boost is taken off the factory manifold sensor on the PM3 remote guage box. The instructions were very good. Remember, measure 2x, cut once.
HTH, brandon.
I used the instruction's given by TST at http://www.tstproducts.com/install_instruct.html
I only installed the pyro probe and fuel pressure, the boost is taken off the factory manifold sensor on the PM3 remote guage box. The instructions were very good. Remember, measure 2x, cut once.
HTH, brandon.
Thread
Thread Starter
Forum
Replies
Last Post
bradmizer
3rd Gen High Performance and Accessories (5.9L Only)
9
Aug 27, 2008 11:03 PM
bogie418
3rd Gen High Performance and Accessories (5.9L Only)
16
Oct 3, 2005 03:22 PM