OK , I know I have small dvs in my truck now and I am looking to replace them. What is the deal with laser cut dvs? Where is a good place to get them? Can get my old dvs cut?


Thansk

 

If you get some dv's, add some 370's too. Of course you'll need a larger turbo at that point. But that's the fun of the BOMBing bug.

Piers sells 191's for about $250. They suggested that when I get 370's, I should install 191's to eliminate the stumble that accompanies big injectors and small pumps. Give the guys at Piers a call and see what they say.

 

I have 370s on the way and I am putting together a hx35/40 hybrid right now. Last thing are these dvs. Does peirs have the best price?

 

Where could a fella get some 181 take outs?

 

I've heard Piers will sell you some 181's if you ask. I have no idea how much they charge. If you get a set, let us know how much $.

Jambbii, From the shopping I have done, Piers price was as good as anyone. Do your EGT's get pretty warm with your setup. I have seen 1400 with mine.

 

you don't "need" a bigger turbo, but it'd definately be nice...

I ran 370's and a #6 plate full forward on my 97 5sp pump w/ the stock turbo. the pyrometer was basicly a throttle position sensor

Forrest

 

I am ok on egts, I was just doing some drag racing and I was keeping a close eye on the egts, they were hovering around 1250-1350