general gauge install ? for stock truck

Reply Subscribe

Thread Tools

Search this Thread

Jan 10, 2008 | 01:01 PM

#16

RAFTEN

Registered User

Joined: Aug 2001

Posts: 246

Likes: 0

Sort of related, if you install a electric WesTach fuel pressure gauge, be aware that the hose they use is not good for biodiesel. They get soft and sticky, then they burst.

Jan 10, 2008 | 02:51 PM

#17

Busboy

Registered User

Joined: Aug 2007

Posts: 3,901

Likes: 37

From: On the Farm, Manitoba

Quote:

Originally Posted by jay_naz

Well, I've installed and tested my fuel pressure gauge and boost portion of my boost/EGT gauge. Don't have the lights connected yet. I'm not sure that I have an ashtray light on my 99. I don't see any light. Where should it be? Also here are my Fuel pressure readings: idle 11-12 psi, cruising 8-9 psi, WOT 6-7 psi. What are the thoughts? OK or lift pump getting weak. I have 87K on my stock truck.

If you remove the ashtray holder the light is in the silver metal clip on the top. The bulb holder just pulls out. It's very easy.