What type of fitting will I need to connect a mech fuel pressure gauge to a 98 24v? Specificially i'm looking at the Di-Pricol gauge.

 

I'm not sure exactly what you are asking...<br><br>If you look on the top of your fuel filter, there will be two little brass looking plugs. The forwardmost is post-filter. The other is prefilter. These plugs are 1/8th NPT.<br>

 

This is a picture of my '99 hooked up to monitor pre-filter.

https://www.dieseltruckresource.com/...96&amp;pid=674

 

Okay, i wasn't sure if a certain adapter or something was used. The pic helped