first time on dyno!
Thread Starter
Registered User
Joined: Dec 2003
Posts: 605
Likes: 0
From: Just Moved To COLUMBUS, OH
first time on dyno!
first tim on the dyno today.. truck is making a nice 264.1 horsepower and 618.7 foot pounds of torque. I was very surprised i had even this much, but i cant wait to order my injetors and turbo upgrade on friday!!!
Click here to see Video
Thread Starter
Registered User
Joined: Dec 2003
Posts: 605
Likes: 0
From: Just Moved To COLUMBUS, OH
hopefully the new video has sound! if the sound works listen to the engine start to lose power after it reaches 2300 rpms, even with a 3kgsk. its like its running out of fuel.
I cant tell much on the sound of the truck on the video, but it sure didnt sound like the dyno was loading it at all. Also, was the TC staying locked, or was it unlocking? That will mak a big difference too. Not bad numbers, but I would have figured a little more.
Eric
Eric
Thread Starter
Registered User
Joined: Dec 2003
Posts: 605
Likes: 0
From: Just Moved To COLUMBUS, OH
converter locked, and there was no sound in this video...
im trying to upload it again so you can hear it.... im looking to get 370's and a htt hybrid stage iv upgrade... so mabe a little better then... im still unsure about top end fueling...
had to delete the old to update with the new. will have the link asap.
im trying to upload it again so you can hear it.... im looking to get 370's and a htt hybrid stage iv upgrade... so mabe a little better then... im still unsure about top end fueling...
had to delete the old to update with the new. will have the link asap.
Trending Topics
I heard the sound fine. All you have to do is click the "windows media player" right above the video and it changes it over to windows media player, and the sound worked fine for me then
Eric
Eric
Thread Starter
Registered User
Joined: Dec 2003
Posts: 605
Likes: 0
From: Just Moved To COLUMBUS, OH
here is the video and it has SOUND... listen to the end of the run, you can heaR THE RUSH OF THE motor then it dies for the next 700-800 rpm once you get over 2300rpms...
Click here to see Video
And Ramdriver15, very nice numbers, now that ur BIT, theres no lookin back... good luck!
Rick
Thread Starter
Registered User
Joined: Dec 2003
Posts: 605
Likes: 0
From: Just Moved To COLUMBUS, OH
[/QUOTE]And Ramdriver15, very nice numbers, now that ur BIT, theres no lookin back... good luck!
Rick
[/QUOTE]
i already ordered a set of 370 injectors
!!! lol..... then next thursday im looking for the turbo upgrade!!! i was hooked the day i made the #10 plate
last march, and ive been held back financially, but now i have a few extra bucks!!!
Rick
[/QUOTE]i already ordered a set of 370 injectors
!!! lol..... then next thursday im looking for the turbo upgrade!!! i was hooked the day i made the #10 plate
last march, and ive been held back financially, but now i have a few extra bucks!!!
Thread Starter
Registered User
Joined: Dec 2003
Posts: 605
Likes: 0
From: Just Moved To COLUMBUS, OH
it has its limits.... these injectors are pushing it, unless i can get the owner of the dealership i work at to make another donation to the school!!
the injectors will be here tomorrow!!!
BTW... Txdiesel: your newbie article is part ofmy project.....
the injectors will be here tomorrow!!!
BTW... Txdiesel: your newbie article is part ofmy project.....



, freebie!!!