FASS is in but?

Reply Subscribe

Thread Tools

Search this Thread

Dec 7, 2004 | 11:23 PM

#16

ratsun

Thread Starter

Registered User

Joined: Jan 2004

Posts: 2,342

Likes: 1

From: Wet Coast, Canada

The kit comes with every thing you need from the tank outlet to the VP44. The only thing factory left when your finished is the VP44 to tank return and the tank pick up.

Dec 7, 2004 | 11:54 PM

#17

joefarmer

Registered User

Joined: Sep 2003

Posts: 1,300

Likes: 0

From: stupid ohio

Quote:

Originally posted by njoverkill
I'll be running 3/8" SAE J03R9. Wonder if I should've gone with 1/2". It'd seem weird running 1/2" when the port on the vp44 is so small. But I guess if the bottleneck is RIGHT at the vp44 it doesn't matter much(?)

I'm supporting 600hp with 3/8" hose. The fuel pressure raises from 15psi to 19psi after a hard run. It does not pull the fuel pressure down.

brandon.

Dec 8, 2004 | 11:39 AM

#18

Moose10

Registered User

Joined: Feb 2004

Posts: 1,071

Likes: 0

From: Chaffee, NY

Quote:

Originally posted by njoverkill
Does FASS come with fuel lines or uses stock fuel lines?

I put this together for my system... No idea what kind of pressure it'll give me or HP it'll support.

This is 12mm x 1.5mm weber carb (vp44) to -6an adapter, -6 an female 90 degree -6an female, -6an male to 3/8" npt male with 1/8" npt fuel pressure gauge port

njoverkill,
Where did you get your fuel system components? Specifically the tapped -6an to 3/8npt fitting. I just ordered the "FASS II" (pump only) and need to remake a new hookup for my needle valve/FP gauge in between the filter housing and VP44.
Thanks !