BobQ

I got the wheel cylinders but they are too short, in other words there is not enought throw, the ends pop out when pushing brake pedal, I have the adjusters adjusted????? I used the part num on this sight napa 37337.

The stock cylinder is .5 inches longer that the chevy. Any ideas?


Thanks Bob

BobQ

I just wanted to add, the cups are getting pushed off, maybe the new cylinder is just leaking?

2broke2smoke

put mine on two years ago ...
don't remember much as the whole job took about an hour ...

but they were same length

BobQ

The new one are shorter but it all worked out. Thanks