Bullseye Power Twins
ive been on the bullseye site and it gives a veryyy short detail of information.. a caution flag raises in my mind is the claim of the most hp in the world @ 1374 using nitrous im sure many sled pullers and drag trucks make just as much if not more with nitrous. what raises another caution flag to me is that they say its a 12v and a 24v kit .. these motors are definetly not the same in head design.. anyone trying one out there?
The guy that told me about them has one on and he has a 12v . Just one more thing if you read about the kit the turbo sizeing is more for the 700+hp club. But if you have done your home work on turbos like S-300 & S-400 twins you can by just changeing wheel size make a kit with this pipe kit or any twins kit for these turbos make up to 1000hp or more just on fuel . I think the truck that made all that power was in one of the diesel power books so its not a claim and it was on Dunbars dyno . I know its not easy to make that kind of power even with nitrous in you setup . Just wont to know what hp # would you think is the top # on a non 3ed gen street driven truck ????
Head design is different, but mounting locations are the same. Use the respective manifolds, and it should swap between a 12 and 24 without much issue.
Thread
Thread Starter
Forum
Replies
Last Post
Old Smoky
3rd Gen High Performance and Accessories (5.9L Only)
0
May 13, 2009 10:50 PM
kantdrive55
3rd Gen High Performance and Accessories (5.9L Only)
16
Nov 23, 2007 12:19 PM



