boost port for gauge
Thread Starter
Registered User
Joined: Jul 2003
Posts: 98
Likes: 0
From: Discovery Bay CA
boost port for gauge
Where is it on my 2001? The website I found an install for said it was 3/4 pipe thread but the plug I found in mine is closer to one inch! It definately had pressure so I don't know what's up. Please help!
Registered User
Joined: Jan 2003
Posts: 297
Likes: 0
From: Waller Co. Texas
Re:boost port for gauge
It is the 3/4" pipe plug on the drivers side of the engine between the fuel filter and the fire wall. The 3/4" pipe plug is actually a little larger than 3/4", but that's is the correct size. You will need a 1/2" square drive to remove it.
There are other ways to tap into the boost. One of our vendors here sells a replacement bolt that is tapped (can't remember who at the moment) and you can also tap the air horn.
hth
There are other ways to tap into the boost. One of our vendors here sells a replacement bolt that is tapped (can't remember who at the moment) and you can also tap the air horn.
hth
Registered User
Joined: Nov 2001
Posts: 389
Likes: 0
From: Heber, Utah
Re:boost port for gauge
Piers Diesel Reasearch sells a tap as mention above for the Boost gauge:
http://www.piersdiesel.com/index.htm
Steve
http://www.piersdiesel.com/index.htm
Steve
Thread
Thread Starter
Forum
Replies
Last Post
Katmandu
12 Valve Engine and Drivetrain
3
Nov 10, 2008 03:18 PM
QWKRTNU
3rd Gen High Performance and Accessories (5.9L Only)
1
Sep 26, 2006 10:22 PM
