Anyone Runnimg Alcoa 22.5 Wheels ?
Thread Starter
Registered User
Joined: Jan 2011
Posts: 5
Likes: 0
From: Saint Louis, MO
Anyone Runnimg Alcoa 22.5 Wheels ?
Hello,
I have 22.5" Alcoa's and 22" tires.
CALM DOWN !!!!! I bought the truck that way. Does anyone else run 22's on 22.5 wheels? I have no idea why the previous own did this but just wanted to know if anyone ran into any problems with this combo. Of course Alcoa (Recommends!) that you don't do this, but I have talked to some tire folks that say this is common and causes no problems.
Thanks
Grant
I have 22.5" Alcoa's and 22" tires.
CALM DOWN !!!!! I bought the truck that way. Does anyone else run 22's on 22.5 wheels? I have no idea why the previous own did this but just wanted to know if anyone ran into any problems with this combo. Of course Alcoa (Recommends!) that you don't do this, but I have talked to some tire folks that say this is common and causes no problems. Thanks
Grant
Thread Starter
Registered User
Joined: Jan 2011
Posts: 5
Likes: 0
From: Saint Louis, MO
Wheels
The wheels are not shaved, I had a flat and when the tire was removed I checked. I talked to a tire guy that said that installers just pop the tires on and everything is OK
Registered User
Joined: Sep 2007
Posts: 1,290
Likes: 0
From: MN
On a side not, those durabrites, are about the crappiest thing invented, I polish alot of rims at my side job, and there is really no way to polish them due to the coating on them. Also the coating with get scratches and nicks and will become hazy over time.
Thread
Thread Starter
Forum
Replies
Last Post
Jschlachta
1st Gen. Ram - All Topics
1
Aug 23, 2012 04:30 PM
Steve-l
3rd Gen High Performance and Accessories (5.9L Only)
3
Feb 14, 2005 03:25 PM
Goldenbear
3rd Gen High Performance and Accessories (5.9L Only)
8
Feb 11, 2005 05:09 PM