Who is running a 16x8 aftermarket wheels with about a 33" tire (285/75/16)??? What backspacing 4" or 4.5"??? any pics? I am trying to figure out what looks better? Thanks --Neil

 

I'm running 16X8's on a 37" tire.....I believe the backspace is about 4". Look in my gallery.

 

I'm runnin 16X8's with 285/75/16 Master Craft Courser CT's

Check my gallery in Member's Photos.
There is a couple pics. of mine there.

I hope it will show you what you want.



: Eddie :

 

Cow, are those the Mickey Thompson Classic II's???

 

I'm running 16x8's with 315's

 

hey dodg301, What backspacing are yours? do you have any rubbing with those? good looking truck

 

Eagle 589's....I like the MT Classic II's better.....looking at the Classic Locks right now

 

I believe that they are 4 1/2 in. back spacing. And they have never rubbed. Thanks

 

what does the back spaceing do and were do i get them i have 295/75/16 and they rub when turning

Thanks
Dan

 

If they are rubbing on the control arms, then less backspacing will cure that.

Too little backspacing, then they will rub on the inside rear of the fenders.

Stock wheels are around 6.5" backspacing, most aftermarket are 4.5".

8" wheel with 4.5" backspacing won't rub much.
10" wheel with 4.5" and a 35" tire rubs the inside fender.


phox

 

Who are the cheapest tire/wheel package vendors you have used?

 

i have a set of cragar 16x7's with 285/75R16's and a little more offset than stock...being a narrow rim it bulges the tire slightly, but not bad, and the offset puts it about an inch outside the fender...looks so awesome...ill put pics in my gallery in the next couple minutes

 

16 X 8 Mickey Thompson Challengers with 305/70-16 Goodyear Wranglers. Don't rub, I think they are 4.75" backspace. See my gallery.