I know you have seen the video, does anyone know what this guy has done to the 12V thats in it? as far as which turbo(s), injectors, cam?, plate, etc...

there are a few people that I work with that need to be smoked by a big ugly truck, particularly this kid with a WS-6 Firebird.

 

Send your Pump to Piers or Scheid or Mitchell's.
Get some decent size twins, same suppliers as above.
Cam and pistons and head from suppliers as above.
Ask for a setup for a 600hp+ truck.

Tranny from ATS.

Get ready to spend about 15-20 grand.

--Justin

 

Richard is running our Stupid pump with our custom race plate and cam shaft. Twins are "B" combo with Big Brother as primary.
Richard has made runs in the 11.2's and surely will break into the 10's soon.

 

If you check out the chat room here at night you might see him on and ask him. He goes by Maddog1.
He recently ran 11:28 at 120MPH since then ran 11:23 at 117MPH.
What a cool truck. ;D--GO Maddog

 

Hey anybody have a link to this video??


I must be the only one that hasnt seen it. ;D


Thanks!!!

 

[quote author=Chris Rowe link=board=7;threadid=24020;start=0#msg227785 date=1072121565]
Hey anybody have a link to this video??
[/quote]

Try This Thread https://www.dieseltruckresource.com/...threadid=22911

 

Well which is it a WS-6 or a Firebird? Cause firebird I can even beat with a 80hp chip and 33's on a 4wd Excursion...But the WS-6 I have alot of trouble with even when I have my other chip which is 130hp/300tq custom chip and a 10psi launch.

 

the link for the video doesnt work does anyone else know how to view it???

 

THE LINK DOES NOT WORK DOES ANYONE HAVE ANOTHER WAY TO IT????

 

what kind of RPM is he spinning?

if u send me ur email address i have a video of a black f350 crew making an 11sec run not sure if this is the one everyone is talking about.
its a 5 meg file
Dan

 

This Video???

Mark