tryin to make some more power out of a ol dodge, help needed
#1
Registered User
Thread Starter
Join Date: Sep 2007
Location: boerne texas
Posts: 319
Likes: 0
Received 0 Likes
on
0 Posts
tryin to make some more power out of a ol dodge, help needed
i have a 1989 dodge d100 3.9l v6 5spd. It is rated at 125hp and 195tq. i would like to up those numbers a bit. Exhuast, air intake, what else can i do that is affordible and where can i get it?
thanks in advance
thanks in advance
#2
Registered User
Join Date: Nov 2002
Location: near Magnolia, Tx.
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Swap out the motor for a 318 .... decent power and not as thirsty as the 360. Or if you really want to make things interesting ... go for a 440 !!
As you can see ... I don't recommend pouring much into the six banger.
PISTOL
As you can see ... I don't recommend pouring much into the six banger.
PISTOL
#3
Registered User
Join Date: Jul 2007
Location: Arlington, Tx
Posts: 184
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, theres no replacement for displacement, and the 3.9 is about as far from a powerhouse as you could get in a full size (well except for the early 80's slant six.) There isn't much out there for them anyway and any power increase will be neglegible.
#4
Registered User
Join Date: Aug 2006
Location: Cresson/Stephenville Texas
Posts: 2,436
Likes: 0
Received 0 Likes
on
0 Posts
Thread
Thread Starter
Forum
Replies
Last Post
krazydher
3rd Generation Ram - Non Drivetrain - All Years
10
12-20-2009 07:52 PM
wap
3rd Gen High Performance and Accessories (5.9L Only)
12
11-30-2005 06:50 AM
myglide
3rd Gen High Performance and Accessories (5.9L Only)
7
10-26-2004 08:11 PM