Man I love my Wife
Thread Starter
Registered User
Joined: Jun 2003
Posts: 1,015
Likes: 0
From: Texas
Man I love my Wife
Sometime this weekend I ripped the wires out of the output sensor (What the Dealer Called it) for my tranny. Well I was able to drive on it for the past couple of days with no major trouble and I also ordered the new plug today so I thought I was good till tomorrow when it will get in 
. Well tonight I took my wife out to dinner and a movie but on the way to the movie my truck stopped running right. I couldn't go over 2k rpm and couldn't go over 20mph. So we made the now one hour drive back to the house and on the way I got to thinking about her 1995 Jeep Grand Cherokee. I bet that it had the same plug that I needed and would work for my truck. After finally getting home I looked under her car and sure enough the exact some plug and exact same color wires. Cut it off and hooked it up to my truck and BANG truck is fixed and running like it should 
. So now her car is out of action until tomorrow and she has to get a ride to work. This is the good part she is 100% cool with this and couldn't care less 
. I just have to say I married on heck of good women. 
So if yall need parts look at all Mopar products you might get lucky.
. Well tonight I took my wife out to dinner and a movie but on the way to the movie my truck stopped running right. I couldn't go over 2k rpm and couldn't go over 20mph. So we made the now one hour drive back to the house and on the way I got to thinking about her 1995 Jeep Grand Cherokee. I bet that it had the same plug that I needed and would work for my truck. After finally getting home I looked under her car and sure enough the exact some plug and exact same color wires. Cut it off and hooked it up to my truck and BANG truck is fixed and running like it should . So now her car is out of action until tomorrow and she has to get a ride to work. This is the good part she is 100% cool with this and couldn't care less . I just have to say I married on heck of good women. So if yall need parts look at all Mopar products you might get lucky.
Registered User
Joined: Jan 2003
Posts: 1,113
Likes: 0
From: Sugarland,College Station, Mason, TX
My mom needs lessons on cooking. She made mash taders and gravy and some kind of veal patty or something...(couldnt figure it out) and I swear to it guys I had to fling the spoon just to get the mash taders off. 
Registered User
Joined: May 2003
Posts: 1,515
Likes: 0
From: The 951-Flatbill center of the universe
I love my wife too, for way too many reasons to list. One of which is that she lets me spend money on the truck.
But if I pulled parts off of her new Durango to get my truck running, she'd kill me.
She did let me drive it to work last time my truck was down.....she's a keeper!
But if I pulled parts off of her new Durango to get my truck running, she'd kill me.
She did let me drive it to work last time my truck was down.....she's a keeper!
Trending Topics
Thats MR Hoss to you buddy!
Joined: Jul 2001
Posts: 2,759
Likes: 3
From: Central Texas
Re: Man I love my Wife
Originally posted by DODGE4X4
Sometime this weekend I ripped the wires out of the output sensor (What the Dealer Called it) for my tranny. Well I was able to drive on it for the past couple of days with no major trouble and I also ordered the new plug today so I thought I was good till tomorrow when it will get in. Well tonight I took my wife out to dinner and a movie but on the way to the movie my truck stopped running right. I couldn't go over 2k rpm and couldn't go over 20mph. So we made the now one hour drive back to the house and on the way I got to thinking about her 1995 Jeep Grand Cherokee. I bet that it had the same plug that I needed and would work for my truck. After finally getting home I looked under her car and sure enough the exact some plug and exact same color wires. Cut it off and hooked it up to my truck and BANG truck is fixed and running like it should . So now her car is out of action until tomorrow and she has to get a ride to work. This is the good part she is 100% cool with this and couldn't care less . I just have to say I married on heck of good women.
So if yall need parts look at all Mopar products you might get lucky.
Sometime this weekend I ripped the wires out of the output sensor (What the Dealer Called it) for my tranny. Well I was able to drive on it for the past couple of days with no major trouble and I also ordered the new plug today so I thought I was good till tomorrow when it will get in
. Well tonight I took my wife out to dinner and a movie but on the way to the movie my truck stopped running right. I couldn't go over 2k rpm and couldn't go over 20mph. So we made the now one hour drive back to the house and on the way I got to thinking about her 1995 Jeep Grand Cherokee. I bet that it had the same plug that I needed and would work for my truck. After finally getting home I looked under her car and sure enough the exact some plug and exact same color wires. Cut it off and hooked it up to my truck and BANG truck is fixed and running like it should . So now her car is out of action until tomorrow and she has to get a ride to work. This is the good part she is 100% cool with this and couldn't care less . I just have to say I married on heck of good women. So if yall need parts look at all Mopar products you might get lucky.
Registered User
Joined: Aug 2002
Posts: 1,395
Likes: 0
From: Flat Rock, MI
Re: Man I love my Wife
Originally posted by DODGE4X4
So if yall need parts look at all Mopar products you might get lucky.
So if yall need parts look at all Mopar products you might get lucky.
Registered User
Joined: Nov 2002
Posts: 504
Likes: 0
From: near Magnolia, Tx.
Originally posted by 3KrackerRacing
My mom needs lessons on cooking. She made mash taders and gravy and some kind of veal patty or something...(couldnt figure it out) and I swear to it guys I had to fling the spoon just to get the mash taders off.
My mom needs lessons on cooking. She made mash taders and gravy and some kind of veal patty or something...(couldnt figure it out) and I swear to it guys I had to fling the spoon just to get the mash taders off.
PISTOL
