I know more about the electricity than the gennys themselves.

what you got? and what did you do to that car?

 

HAD A BUDDY THAT HAD RENTED A LG ONE AND WASNT SURE HE HAD IT HOOKED UP RIGHT- THIS MORNING HE USED A TESTER AND RE WIRED THE OUTPUT.

THE CAR IS MY SONS- A GIRL RAN IN TO HIM IN SCHOOL PARKING-LOT(ICY)
MY BUDDY HAD A GIG THAT HE USES & I BORROWED- IT IS ABOUT 12 SQUARE
EACH SIDE HAS A BEND THAT ALLOWS IT TO HOOK BEHIND LIP ON A WHEEL WELL
ONE SIDE IS STRAIGHT- AND THE OTHER IS CURVED TO FOLLOW CONTOUR OF WHEEL WELL
ITS HEAVY ENOUGH THAT YOU CAN SLIDE IT IN AND HOOK A COME-ALONG ON THE OTHER SIDE AND PULL A 12 IN AREA AT ONE TIME - WORKS GOOD.
IF YOU LOOK AT THE FIRST PICT THE LIP IS TIGHT AGAINST THE TIRE
ON THE SECOND YOU CAN SEE THAT IT HAS CLEARANCE.
WHATS THE LATEST ON GOING OVERSEAS ?
CLAUDE

 

on the genny, L1, L2, and L3 are your power lines (480/240 between each). Prolly has a neutral line. 277 from a 480 line to neutral, dont remember 240 line to neutral off the top of my head.

Its nice to get your sons car straightened out enough to drive it. My daughter keeps pestering me to let her take my 4x4 trooper to school.

a part arrived there today that should keep me out of Kaz, but my passport is at the Kazaky embassy getting an annual visa. We will see in a couple days...

 

ha!ha! THIS OLD RED NECK CAN USALLY FIGURE OUT A WAY TO MAKE MOST THINGS WORK.
AND FIX MOST THINGS.
THAT GENNY -I ONLY HAD A PICT TO WORK WITH- HE IS ON A JOB IN IN-ABOUT 350 MILES FROM ME- BUILDING A 90 ROOM MOTEL
HE IS A PROJECT MGR FOR A LG CONSTRUCTION CO. USE TO WORK FOR ME AT ONE TIME-
HOPE YOU CAN AVOID GOING OVER THERE

 

If the genny is a rental, usually they will come out and help you setup so you dont fry their equipment.

Also, depending on what he is using it for will depend on how its wired. Usually, our equipment is 3 phase and just wired into L1, L2, and L3 and grounded.

If he rented a 3 phase genny, then more than likely he has three phase equipment. Motors are the only thing that can be picky as they will run backwards if wired wrong (but you dont know right until you spin the motor). Welders usually aren't picky. Lights usually aren't picky (just get the right voltage).

 

I Kind Of Feel Proud - Was Able To Teach Him A Lot When He Worked For Me - He Has Been A Sucessful Project Mgr For About 7 Yrs Now -and When He Has A Question Still Askes For Info From Me.
HAVE YOU GOT JC PENNIES OUT THERE?
HE WAS DOING A REMODEL ON ONE AND I GOT THE BID ON ALL THE CASH STANDS -TWO STORY BLD- NOW THAT WAS A GOOD JOB$YEA

 

Pioneering spirit? The Pilgrims landed in Plymouth... MASS, not Michigan!

Evenin' coffee is just about ready for those that want/need it.

chaikwa.

 

YEA I KNOW MY RELITAVES WERE THERE WITH YOURS- REMBERAND SOME OF OUR RELITAVES SMVED WEST TO THE FRONTEER IN 1823 & 24
THEN SOME OF THE STRAGLERS CAME-ALONG IN 200?

 

Yea, we have a pennys. all their stuff seems a bit preppy to me. If Im gonna pay $70 for jeans that look dirty, it better be real dirt...

Im gonna pass on the evening coffee. I think my caffine intake is messing up my sleep habits anyway...

 

Then You Know How Large Each Casheer Stand Is They Usally Circle The Workers There Were 6 Or 7 Units Per Cash Stand- You Wouldn`t Belive How Much Formica I Used In That Project

 

I think ours are set up for 4 workers. never see more than one there at a time unless its the week before chirstmas and there will be two there. and a dual spiral line of people waiting patiently...

 

MOST OF WHAT I DID WAS RESEDENTIAL-BUT WHEN I GOT THE CHANCE I
DID COMERCIAL - (MORE PROFIT IN IT) DID A BIG BOILER ROOM FOR SEARS ONCE (ROWS &ROWS OF CUMPUTERS & PHONES) NOTHING FANCY

 

TOP, don't you remember what the judge said the last time you exposed yourself??? (after he stopped laughing)

Y'all certainly are a talkative lot tonight. I need to report a crime, I got attacked by a vampire leaving church tonight and she stole my blood. We had the bloodmobile waiting on us tonight and they got me.

 

Evenin, all. Had a fair night, I know that something is wrong with the mad mobile...

Hey, you guys need a genny? I got 208 Kw 3 phases all day long, I'll take 7k each, plus dilevery charge. They run on #2, tho. Not very efficent, but it will run a few city blocks...

Bout to post my fuel pressure problems... Hope everyone is having a good evening...

 

I dont have much use at home for 3 phase. (yea, I could convert)
Now if your gonna start giving them away, I will swing by and pick one up but only if you throw in a couple cans of 5.56.