I heard there is a way to make one of these Dodge Fulltime cases, part time. does anyone have any info? Hypothetically, How would a fulltime case act on a truck with front lockout hubs?

Thanks

 

Milemarker makes the most popular part time kit for the NP203......also, you CANNOT use manual hubs on a full time NP203 unless the case is in the low or high lock position.....when the case is in the full time unlocked position for street use the truck will not move one inch if the hubs are unlocked and the viscous center differential in the chain case will quickly go up in smoke. The part time kit locks out the center viscous diff, rendering it inoperative and thereby allowing the NP203 to operate like a typical part time case at which point manual hubs will work fine.

 

Any guess what this kit sells for?

 

I'll see if I can dig something up....

Here is the info on the kit from MM http://www.milemarker.com/4x2conversion.html

 

I don't see any prices yet (I think around $400?) but here is a good how-to article I came across for installing the kit.

http://custom4x4magazine.com/milemarker_page2.htm