Natl. and Regional Chapters / Special Events Discuss events and rallies here. Also discuss your local and regional chapters.

N TX Chapter Meet - Nov.

Thread Tools
 
Search this Thread
 
Old 11-12-2006, 04:45 PM
  #271  
Registered User
 
bnold's Avatar
 
Join Date: Oct 2005
Location: Dallas area
Posts: 2,184
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by crobtex
BrIan, please clarify the warm bed statement!


And another thing, you clowns.........3 BD's in one year is ENOUGH.
Oh but you looked so good on that sadldle.

That bed was warm to get into but by 2am it was 40 degrees and the heater was blowing cold air!! My sweatshirt could only do so well as a blanket!! Lol Good times.....
Old 11-12-2006, 05:21 PM
  #272  
Chapter President
 
crobtex's Avatar
 
Join Date: Oct 2002
Location: Sedalia, Texas
Posts: 4,983
Likes: 0
Received 1 Like on 1 Post
Originally Posted by bnold
Oh but you looked so good on that sadldle.

That bed was warm to get into but by 2am it was 40 degrees and the heater was blowing cold air!! My sweatshirt could only do so well as a blanket!! Lol Good times.....

Oh yea..... (note to self: check the propane in the camper.)

Robert, you can have one of mine......two, if you want.
Old 11-12-2006, 06:04 PM
  #273  
Registered User
 
bnold's Avatar
 
Join Date: Oct 2005
Location: Dallas area
Posts: 2,184
Likes: 0
Received 0 Likes on 0 Posts
Here is 'Mike and son' installing the heims on his auxillary drive shafts (aka ladder bars):



and BigBlue draining his 800mile old synthetic tranny fluid... Took a lot longer to fill than it did to drain!!

Old 11-12-2006, 06:15 PM
  #274  
Chapter President
 
crobtex's Avatar
 
Join Date: Oct 2002
Location: Sedalia, Texas
Posts: 4,983
Likes: 0
Received 1 Like on 1 Post
BrIan, be sure to send your pics to Rob (hotdram) so he can put them on the North Texas website.

(another note to self: you have a new camera.....TAKE PICTURES)
Old 11-12-2006, 06:16 PM
  #275  
Registered User
 
bnold's Avatar
 
Join Date: Oct 2005
Location: Dallas area
Posts: 2,184
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by crobtex
BrIan, be sure to send your pics to Rob (hotdram) so he can put them on the North Texas website.

(another note to self: you have a new camera.....TAKE PICTURES)
Didn't want to say anything after the grief tyler got for his cell phone battery... Camera battery was dead...
Old 11-12-2006, 06:25 PM
  #276  
Chapter President
 
crobtex's Avatar
 
Join Date: Oct 2002
Location: Sedalia, Texas
Posts: 4,983
Likes: 0
Received 1 Like on 1 Post
I can't say anything.........I had two set of charged batteries and forgot to use them.
Old 11-12-2006, 11:24 PM
  #277  
Registered User
Thread Starter
 
XLR8R's Avatar
 
Join Date: Nov 2005
Location: Pattonville, Texas
Posts: 7,785
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by crobtex
Three BirthDays.
I thought you was lookin' pretty spry for an octogenarian...

Guess them BDs were in Dog Years
Old 11-12-2006, 11:27 PM
  #278  
Registered User
Thread Starter
 
XLR8R's Avatar
 
Join Date: Nov 2005
Location: Pattonville, Texas
Posts: 7,785
Likes: 0
Received 2 Likes on 2 Posts
Originally Posted by bnold
Here is 'Mike and son' installing the heims on his auxillary drive shafts (aka ladder bars):



and BigBlue draining his 800mile old synthetic tranny fluid... Took a lot longer to fill than it did to drain!!

BrIan - glad you didn't get the shot of all 5 of us holding onto the bar to get that one stubborn heim turned all the way in!
Old 11-13-2006, 07:40 AM
  #279  
Registered User
 
TorqueJunkie's Avatar
 
Join Date: Nov 2005
Location: Joint Base Balad, Iraq
Posts: 189
Likes: 0
Received 0 Likes on 0 Posts
Sorry I didn't get to make it as well. I will make the next one whenever it is...
Old 11-13-2006, 07:45 AM
  #280  
Registered User
 
MikeyB's Avatar
 
Join Date: Oct 2002
Location: Tomball, Texas
Posts: 7,543
Likes: 0
Received 4 Likes on 4 Posts
Dang Mike, is those ladder bars long enough? Going to attach them to the front axle??

MikeyB
Old 11-13-2006, 07:58 AM
  #281  
Registered User
 
AggieJustin's Avatar
 
Join Date: Jul 2002
Location: Celina, TX
Posts: 2,242
Received 16 Likes on 13 Posts
Originally Posted by crobtex
Oh yea..... (note to self: check the propane in the camper.)
New standing rule for this group....always check propane on living quarters before any meet.

At least it wasn't 15 degrees out this time.

Congrats on the numbers Tyler...based on my SOP dyno and the trailer I had this weekend, I'd say this KSB1 is working nicely for me.
Old 11-13-2006, 08:00 AM
  #282  
Chapter President
 
crobtex's Avatar
 
Join Date: Oct 2002
Location: Sedalia, Texas
Posts: 4,983
Likes: 0
Received 1 Like on 1 Post
Originally Posted by GibletC
Sorry I didn't get to make it as well. I will make the next one whenever it is...
Sorry you couldn't make it. Stay tuned and watch for the next one.
Old 11-13-2006, 08:04 AM
  #283  
Registered User
 
hotdram's Avatar
 
Join Date: Feb 2003
Location: McKinney, TEXAS
Posts: 1,747
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by AggieJustin
New standing rule for this group....always check propane on living quarters before any meet.
Anybody sleeping in inside living quarters (like a trailer) is a pansy

~Rob
Old 11-13-2006, 08:11 AM
  #284  
Banned
 
BigBlue's Avatar
 
Join Date: Feb 2002
Posts: 0
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by AggieJustin
New standing rule for this group....always check propane on living quarters before any meet.

At least it wasn't 15 degrees out this time.

Congrats on the numbers Tyler...based on my SOP dyno and the trailer I had this weekend, I'd say this KSB1 is working nicely for me.
Told ya you'd like it.

Hey whaddaya know, number 10,000.
Old 11-13-2006, 08:15 AM
  #285  
Chapter President
 
crobtex's Avatar
 
Join Date: Oct 2002
Location: Sedalia, Texas
Posts: 4,983
Likes: 0
Received 1 Like on 1 Post
Originally Posted by hotdram
Anybody sleeping in inside living quarters (like a trailer) is a pansy

~Rob

I'm a pansy!......I'm a pansy! ...when it comes to the cold, and I admit it!


Quick Reply: N TX Chapter Meet - Nov.



All times are GMT -5. The time now is 05:33 PM.