Never ending Thread XI
#152
Registered User
Join Date: Oct 2006
Location: Harpers Ferry WV
Posts: 1,641
Likes: 0
Received 0 Likes
on
0 Posts
you need a three arm gear puller to get the cam gear off. i have one at my house if you want to borrow it or harbor freight sells them. takes about 2 mins to pull the cam gear
#157
Registered User
Join Date: Feb 2008
Location: Pylesville, Maryland
Posts: 380
Likes: 0
Received 0 Likes
on
0 Posts
should be a snap ring, retainer ring, and I think there may be another ring of some sort under the retainer ring not sure. I was picking metal peices up all over.
#160
Chapter President
Thread Starter
Dave if you need just retaining rings Motion Industries might have them.
So look what i saw today on Golden ring road by Sullivans. Make a great tow truck with a little work.
So look what i saw today on Golden ring road by Sullivans. Make a great tow truck with a little work.
#162
Registered User
A little body work and a 6bt under the hood and you got a great tow rig with plenty of power. Wish I had the coin for it and the time and space to work on it.
#164
Registered User
Join Date: Oct 2006
Location: Annapolis, Md
Posts: 719
Likes: 0
Received 0 Likes
on
0 Posts
I am having fuel pressure issues and I am going to change the fuel filter first to verify if it is the filter or the pump(again).
Is there anything that I am going to have problems with??
Am I going to have to crack the injectors to get it to fire after the replacement filter is installed??
Should I get a cup of fuel and fill the filter housing before I try to fire the engine again.??
Also, does anyone know what size socket is needed to open the filter housing????
Is there anything that I am going to have problems with??
Am I going to have to crack the injectors to get it to fire after the replacement filter is installed??
Should I get a cup of fuel and fill the filter housing before I try to fire the engine again.??
Also, does anyone know what size socket is needed to open the filter housing????
#165
Chapter President
Thread Starter
John you should be able to just bump the starter a couple times to reprime the system. Don't know about the socket size as i've never had that filter.
Start saving for an Airdog or Fass.
Start saving for an Airdog or Fass.